skip to Main Content

Select Currency:

AE86 / AE71 / KE70 – Engine Crossmember Spacers

$45.00

Rated 0 out of 5
(be the first to review)

Description

AE86 / AE71 / KE70 – Engine Crossmember Spacers

This product is for x2 aluminium spacers, they are designed to fit between the engine crossmember and the bottom of the sub-frame on each side. When fitted they lower the complete engine assembly and tilts the gearbox further down to suit. This is to gain additional clearance from the engine / gearbox to the car body.

These are suggested for use with when undertaking a J160 gearbox conversion and in conjunction with our other J160 conversion parts.

Specifications / Supplied

– Parts: x2 of 10mm thick Aluminium spacers.

– Uses OEM Fasteners: Due to only being 10mm thick there is sufficient thread length on the factory fitted crossmember bolts and can be reused. Therefore no fasteners are supplied. Longer bolts would need to be fitted if these spacers where doubled up to get even more clearance.

Installation guide

Crossmember Spacer Installation guide

Other Installation guides

J160 conversion guide and parts checklist

Additional J160 general, conversion and modification information

Additional information

Weight0.48 kg
Dimensions5 × 15 × 4 cm

Reviews

There are no reviews yet.

Be the first to review “AE86 / AE71 / KE70 – Engine Crossmember Spacers”

Your email address will not be published. Required fields are marked *

You may also like…

Back To Top