20v 4age – Intake adapter to a Pipercross combined filter

Description

20V 4age – Intake adapter to a Pipercross combined filter

This filter adapter plate is for those that have a quad throttle conversion and wish to use long velocity stacks with a method of filtration that’s reliable, low restriction and easy to work with.

 

These may be supplied with a rough surface finish that have imperfections such as scuff marks.

 

Suits

– Pipercross PX600 combined filters – to clear 100mm velocity stacks the correct variant is the C604D model.
– Velocity stacks from the 30 to 100MM in length.

– WILL NOT SUIT the spacing of throttles as used with our 3sge Beams manifolds.

– WILL NOT SUIT most right hand drive – rear wheel drive vehicles due to clearance issues such as the location of the clutch master cylinder. The customer will need to check for adequate clearance.

 

Parts options

This plate is supplied in two different potential variants pending on which model of throttles they are intended to suit.

– 20V 4age Silvertop throttles (either type): 73mm spacing between the centers of the stack mounting holes.

– 20V 4age Blacktop throttles: 83mm spacing between the centers of the stack mounting holes.

 

Additional notes

– Can be mounted upside down by flipping plate for more clearance if needed.

– Plate material is either 304 stainless or aluminium.