skip to Main Content
Select Currency:
Currency:

J160 Gearbox – Gearstick end pivot ball bushing

5.0 (1 review)

$25.00

J160 Gearbox – Gearstick end pivot ball bushing

In stock

SKU: -gb-J160-gearstick-end-bushing Categories: , , ,

Description

J160 / AZ6 gearbox – Gearstick end pivot ball bushing

This plastic bush is fitted at the bottom end of the gearstick over the end pivot ball. Made of a highly robust material (UHDPE) and to tighter tolerances it is an upgrade over the original part. Fitted in place it reduces the amount of unwanted movement in the gearstick / shifting to a minimum.

 

Due to the location of this bushing it’s subjected to a large degree of force and movement which results in wear. Once this happens extra clearance is formed which directly translates into freeplay and hence less precise gear shifting. Even worse is that despite being a consumable part inexplicably there is no replacement available from Toyota or any where else.

 

All that is required for the fitment is to simply remove the gearstick, pull the original bushing off and clip this new part into place.

 

Note

One of these bushings is automatically provided with each one of our  J160 shifter relocation kits.

– This product is only for the bush on the lower end of the gearstick, we don’t offer a replacement for the gearstick middle pivot.

 

Compatibility

Suits both types of Toyota J160 6-speed such as those found an a SXE10 Altezza or IS200 Lexus. It will also work with a gear stick in original or custom use such as a “short shift” kit.

Additional information

Weight 0.05 kg
Dimensions 4 × 4 × 4 cm

1 review for J160 Gearbox – Gearstick end pivot ball bushing

  1. Dan (verified owner)

    The original bushing in my car has 190k km on it so it’s fairly worn, this replacement has definitely made it easier to change gear and feels more direct. Thanks

Leave a customer review

Your email address will not be published. Required fields are marked *

Back To Top