20V 4age- distributor to cylinder head seal

Description

20V 4age – distributor to cylinder head seal

Located on the outside end of the 20V 4age distributors shaft this O-ring seals against the cylinder head.

This is suggested to be changed any time the distributor has been removed and the fitted O-ring hasn’t recently been replaced.

Note

These distributors also have an internal seal from which they may leak from. We don’t offer a rebuild kit however one of our business partners does offer a rebuild service. Their website and contact details (bottom of the page) can be found on their website: Technico Racing.

Installation

– Remove old O-ring seal by cutting it in half with a knife.

– Clean the slot.

– Slide this replacement seal over the end and into place.

– Use oil or grease to lightly coat the outside of the seal.

– Reinstall the distributor back into the head.