3sge Beams – Intake adapter to a Pipercross combined filter

Description

3sge Beams – Intake adapter to a Pipercross combined filter

This filter adapter plate is for those that have a quad throttle conversion and wish to use long velocity stacks with a method of filtration that’s reliable, low restriction and easy to work with.

 

Suits

– Pipercross PX600 combined filters – to clear 100mm velocity stacks the correct variant is the C604D model.

– Individual throttles sourced from a 4age 20V Blacktop.

– Velocity stacks from the 50 to 100MM in length. Our 100mm stacks are highly suggested.

– WILL NOT SUIT most right hand drive – rear wheel drive vehicles due to clearance issues such as the location of the clutch master cylinder. The customer will need to check for adequate clearance.

 

Options

Two different types of plate are available pending on the spacing between throttles (center to center), this is set by the manifold:

[1] – SQ-Eng Quad throttle adapter:

For those using our Beams manifold adapter which uses 91mm spacing between throttle openings.

[2] – TRD / TRD copy:

87.5mm between cylinders #1 to #2 and from #3 to #4
94.5mm between throttles #2 and #3.

 

Additional notes

– Can be mounted upside down by flipping plate for more clearance if needed
– Will not suit throttles from 20V 4age Silvertop