skip to Main Content

Select Currency:

20V RWD Conversion Parts List

Many times we have been asked “do you guys sell a complete conversion kit to make a 20V into rear wheel drive?”. Due to the differing choices available pending on the customers vehicle type, budget, personal preferences and so on we can’t offer one comprehensive kit. So we instead offer many individual kits / parts to make the conversion possible and the complete listing of these is listed here.

Cooling system

Cooling conversion kit: Available with or without a heater option, just use the selectable check box where required.

Ignition: option 1 – for a programmable ECU

Coil pack adapter plate

Distributor blanking cover
This part is required for either of these ignition options.

Ignition coilpacks

Coil connector kits

Ignition: option 2 – for the original 20V ECU

Distributor cap relocation kit

Distributor blanking cover
This part is required for either of these ignition options.

Velocity stacks

To suit a 20V Silvertop throttles

or

To suit a 20V Blacktop throttles

Filtration – slide on

100mm long slide on filters with internal spring

150mm long slide on filters with internal spring

Filtration – base plates

Adapter plates to suit a single combined filter or airbox lid to cover all of the velocity stacks. Apart from the GTIR adapter these will usually only suit left hand drive cars.

Intake plate – Pipercross

Raised Intake plate – Pipercross
As above but with an offset plate to hold the air filter further outwards.

Intake plat e- ITG

20V throttle to Nissan GTIR airbox adapter plate

Other

Spigot bearing
For more information on these see our article here.

Engine lifting hook

Back To Top